Search

Tampilkan postingan dengan label sirious science. Tampilkan semua postingan
Tampilkan postingan dengan label sirious science. Tampilkan semua postingan

Selasa, 01 November 2011

Sirious Science: Frosting Failures


Hi.  It's Learning Time.  But before we get into it, I have to say - THIS ONE HIT HOME!  I've had this happen to me more than once, sadly, and I am thrilled to learn there is a way to fix it!  Hip Hip!  Ok let's go, Sister Georgia...

Ever tried to make frosting and it ended up looking like this?


Don't give up yet!  And please, don't try to serve those to anyone.  Even though that pink mess looks completely irreversible, there are actually ways of salvaging it.  

Last week I was attempting to make a white chocolate frosting to go with a white butter cake.  The white chocolate and heavy cream were blending in the electric mixer as I stood over it with a rubber spatula.  Once it looked frosting-like, I stopped the mixer to scrape down the sides.  When I turned it back on, the consistency of my frosting changed completely.  The air I had whipped into it deflated and the fat separated with the liquid until it became a clumpy, curdled mess.  

Feeling defeated, I called my professor over to ask, "what now?"  She smiled and told me not to worry, that it could be saved.  With what?


Butter.

I tossed about 3 tablespoons in the bowl and let my mixer do the rest of the work.  I had little faith in restoring my disgusting-looking product.  But, a little butter went a long way.  Seconds later my creamy consistency had returned, it no longer looked like vomit, and it tasted great. 

So why did the frosting curdle in the first place?  The most probable reason would be temperature.  I added cold heavy cream to warm, melted white chocolate.  The mistake was not waiting for the white chocolate to cool down long enough before adding the main source of fat.  Therefore, more fat had to be added to balance out the ratio.  Moral?  Be patient!  Science takes time.

Results?


Not too bad.

Thanks Georgia!

Rabu, 05 Oktober 2011

Sirious Science: Yeasty Breads


Active dry vs. rapid rise - ever wondered the difference between the two?  Your recipe will usually call for one of the two; but, DO NOT PANIC, they are completely interchangeable!    


They're both single-celled living organisms.  Both are fungi (ew).  Both will expand in water, much on the sugar you feed it, and produce CO2.

Active dry yeast is made up of dried, pressed granules of yeast incased in an outer shell of dead cells.  That means you need to reapply hydration before using it - usually by soaking in a bowl of warm water which activates it.

Rapid rise is exactly the same, but the beads are smaller in size.  This means that a higher amount of CO2 can be released, causing the bread to rise in half the time.  And who really WANTS to wait that long for their dough to rise?  No one.  I'm a full believer in rapid rise yeast.  And here's the proof!  (No pun intended...)


My Wednesday night dinner usually looks something like this.  We all use rapid rise yeast in our products including French bread, foccacia, steamed rolls, white bread, multigrain bread, and crescent rolls.  I made the gluten-free cinnamon rolls on the bottom!

Unlike my last blog, breads made with yeast are all about developing gluten.  Properly kneading dough is extremely important to maximizing gluten potential.  Kneading too little will make your bread dense and kneading too much will toughen the texture of your bread.  After kneading, the dough should be smooth and soft.  Remember: you can always add flour or water during this process!

Allowing your bread to rest, or proof, is vital for the yeast to ferment.  Keep your unrisen dough somewhere hot (85 degrees F is optimal) in a lightly greased bowl and covered with plastic wrap or a moist towel.  During this process, a lot of changes occur with the yeast.  While you won't be able to see the chemical changes, you'll surely notice the doubling of size of the dough.  This is due to the production of CO2, enzymes, and a pH change as it becomes more acidic.

Some people believe that rapid rise yeast doesn't end up tasting as "bready" because there isn't enough time for acidity to form in such a short amount of proof time.  Though that may be true in some cases, the texture, crust, and shape of the product will be exactly the same.  Both homemade, both delicious, and both even more delicious with butter.

*Thanks Professor Georgia!!  I had NO IDEA and always use Active Dry.  I will now seek out the other stuff because I am not patient.  Also, please invite us over for your Wednesday Night Carb Feast.  And speaking of... she included a recipe...

Multigrain Bread
(Servings: 24)
*This was everyone's favorite in the class, it was gone in seconds.  All of the recipes we use are created by William Collins, the culinary chef here at Syracuse.
Printable Recipe

1 cup water
1 cup yogurt, plain
1/3 cup canola oil, or vegetable oil
1/2 cup oats, quick cooking
1/3 cup wheat germ
1/3 cup bran, unprocessed
2 T flax seed
1/2 cup cornmeal
2 cups bread flour
2 cups all purpose flour, more if needed
1/4 cup brown sugar
4 1/2 tsp yeast, rapid rise
2 tsp salt
2 each egg
Oats to top bread

Soften whole grains: mix wheat germ, cornmeal, oats, flax seed, and bran together in a medium bowl. Heat water, yogurt and oil till simmering and pour over whole grains, mixing well. Allow to cool till 120-130 degrees F –use an ice bath to speed process.
In mixing bowl with dough hook, add bread flour, all purpose flour, sugar, rapid rise yeast, and salt. Add yogurt grain mixture that is at 120-130 degrees F (this helps activate the yeast). Blend well using dough hook in mixer. Stir in one egg and enough remaining flours to make a soft dough. When dough begins to ball up, increase to medium speed and knead with dough hook for 2-3 minutes, till elastic. Cover and let rest in bowl for about 10 minutes.
Divide dough into four loaves, or scale to approximately 12 ounces by weight each. Roll each to the rectangle size of the pans used (8 1/4” x 4”) fold in half lengthwise and pinch ends with heel of hand. Repeat. Fold ends under to fit the pan. Place into pan that had been greased. Spray pan release on top and cover with plastic. Allow dough to rise until doubled in size. Up to 2 hours.
While bread is rising, preheat oven to 400F degrees. Place a sheet pan on lowest shelf and ad ice to pan before product goes in – this will add moisture to the oven and improve crust formation.
Using remaining egg, make an eggwash by beating egg with whisk and a pinch of water. Brush top of load with eggwash using pastry brush. Sprinkle with oats. Make several diagonal slashes with sharp knife on top to facilitate rising of bread. Lower temperature of oven to 375F degrees and bake loaf for 25-35 minutes or until done – temperature at the center of the load will read 200F when done. Remove from load pan and cool on wire rack.

Kamis, 22 September 2011

Sirious Science: Over-Mixing


You've met a lot of my family on this blog.  My mom, my sister Hannah, my brother Dylan, and now I want to introduce you to my youngest sibling... Georgia.  Georgia is a freshman at Syracuse University, on the Rowing team and majoring in Nutrition.  That's right, she's better than all of us.  Broadening her mind, exercising her body and just saying no (NO) to alcohol.  (Don't mess with that image, she's my teeny, tiny sister.)  Georgia's currently taking a Food Science course, so I've asked her to come here from time to time and learn us some things.  Science (and nutrition) was never my strong suit.  SO, ever wonder if recipes are just being bossy when they say, "don't over-stir?"  Ever wonder why the muffins you bake are so dense they could be used as a weapon?  Listen up, there will be a quiz.


If your muffins look like this...


Please, put down your rubber spatula. 

And your biscuits...


Never mind.  That is not a biscuit; that is a hockey puck.

Resist the temptation.  Yes, we all know how hard it is to stand over your bowl of raw dough and not stir the hell out of it; but, really, don't do it.  Mixing, either with your electric mixer or your hands, develops the gluten in the flour, which is what gives your baked goods their texture, structure - basically what makes them really yummy and appealing.  How can you tell your dough is over-mixed?  The end product.  The way it comes out.  If you do it just the slightest bit wrong, it affects your whole recipe, and you'll know.  

MUFFINS...

Rule of thumb for most muffin method recipes, STIR FOR ONLY 10 SECONDS. 

But there are clumps in my muffin batter!  YES.  PERFECT.  Most people don't know that this is the way quick bread mixtures are supposed to look like.  The clumpier the better.  In the oven, the heat will react with the leavening agent in the batter, causing carbon dioxide molecules to form and become trapped in the protein and starch.  This produces the tiny holes that create that bread-like quality.  When all is said and done, your self-control shall be rewarded with a soft and crumbly muffin like this:


(Your muffins should NOT have a high peak and should NOT have a smooth crust on the top.  The inside should be even without tunneling.)

If somehow you still feel obligated to stir until perfectly smooth, the gluten becomes overdeveloped, the air is released and the dough becomes tough.  You'll lose that desired light texture and your product will end up uneven, rubbery, and gross.  

BISCUITS... 

Same goes for biscuits.  Cut the cold fat into the flour using the biscuit method and stop until it's just combined.

But there are chunks of butter in my biscuit dough!  AWESOME.  Leave them there.  The butter chunks will melt, creating gaps, or flakes, where leavening does not occur.  The result?  A perfectly even-celled, light, buttery biscuit.


In short, don't pulverize the dough.  Respect the science and the science will respect your taste buds.